3D-printed protective visor

#3DVFaceShield

This is our first attempt to try helping our heroes helping people sick and in need. There is a shortage of protective gear for doctors and nurses, so we've designed a frame for holding standard sized plastic sheets. Quick to print, easy to assemble. We are so grateful for all the support and downloads we have had globally - and we will keep this going as long as we need to - here are the QUICK LINKS for printfiles and settings to make it easier if you already have a 3D-printer and would like to help too.

The visor is tested and approved by staff all over the world but there are a lot of different regulations regarding medical supplies, please make sure to follow authority guidelines that applies within your region.

Quality-checking
Make sure that:
- layers adhere properly to each other
- walls are completely fused together
- surfaces are smooth without gaps
- the print has decent flexibility


FOR SWEDEN:

DET PRINTAS FÖR FULLT OCH FÅR SKICKAS UT DIREKT - HÄR FINNS MER INFO ANGÅENDE RIKTLINJER

3DVerkstan har under hela denna process varit i nära samarbete med olika organisationer och myndigheter, och visiren har testats och blivit godkända inom sjukvården på en golbal nivå

  • If you are located in Sweden and wants to support a medical regional organization that are taking on the producers responsibility, check our list of these here

FÖRFRÅGNINGAR FRÅN VERKSAMHETER / VÅRDINRÄTTNINGAR 

Förfrågningar angående visir/bågar från verksamheter utanför Stockholm rekommenderas i första hand vända sig till respektive kommun. Det har redan börjat sättas upp lokala distributions-center, denna lista uppdaterar vi så ofta vi kan. 

Alla förfrågningar från verksamheter i Stockholms län ska gå via Stockholm Stads nyinsatta resursgrupp som hanterar insamling och distribution av visir och annan skyddsutrustning: Läs mer här

3DVerkstans produktion och distribution av visir har flyttats till Stockholm Makerspace / THINGS där de just nu har kapacitet att producera över 1000 st per dygn och även agerar uppsamlingsplats. Vi skickar ut direkt till kliniker och vårdpersonal enligt inkomna förfrågningar



Quick Links

WHAT VERSION TO PRINT | PRINT SETTINGS GUIDEFILE DOWNLOAD

The design goals included:

  • Using readily available plastic sheets with as little modification as possible, and only common tools used.
  • All features printable with nozzle sizes up to 1mm and layer heights up to 0.5mm 
  • Drip protection above the eyes
  • Printable in less than 20 minutes
  • No tight tolerances requiring well-tuned printers.
  • Design that works equally well with most common materials (PLA, CPE, PETG, ABS etc.)


 

I WANT TO MAKE THIS, WHAT DO I NEED?:

You need an sheet of semi-rigid plastic, a hole puncher, a 3D printer and some filament.

We currently have three diferent versions, read more on our VERSION PAGE

The files will be updated constantly, but we want to share what we have to let other people help!

Link to all the downloadable files (on YouMagine)

Mirror site #1 (GitHub)



Print settings guide:

The frame is designed to be printed with a 0.8mm or larger nozzle and coarse layer heights.

For more information, please read our PRINT GUIDE

Presliced files and Cura Projects (will be updated soon)


Handling & Packing (SWEDEN)

Read more in our PACKING & HANDLING guide.


PASS IT ON! – HELPING OTHERS TO HELP

Thank you: Lundkvistarna

Thank you: 3D Printing Nerd

Thank you: Tekniska Museet